2021, Waiting on lambs!

secuono

Herd Master
Joined
Oct 16, 2010
Messages
8,550
Reaction score
11,734
Points
623
Location
Virginia is for Pasture Farmers!
So, we'll be getting haying equipment and post hole drill and fork lift n such.
Which means my plans for a lean-to on the short barn wall will happen. If that goes well, I'll continue to add one each on the long sides of the barn.

The alternative is to have metal carports installed and I slowly enclose them.

I need to figure out which I prefer!

I also need to level the gravel and order the metal hay building!
 

secuono

Herd Master
Joined
Oct 16, 2010
Messages
8,550
Reaction score
11,734
Points
623
Location
Virginia is for Pasture Farmers!
Looks like it would be cheaper to go with the metal carports installed. Then I finish them off with time.

No lambs today.

Shrunk hay feeder again to get them to eat more of it before I put in the new bale.

I'm trying to think of how to build long, narrow hay feeders that have the "keyhole" type of design blocking the sheep from making a mess.
The hay baler will be a mini one, so it'll make 40-70# rounds, similar to small square bales, just round!
I want to continue feeding similarly to how I am now, but have the bales laying in the center of a long feeder all in a row. Sheep will line up on either side, stick heads n necks in and eat. All dropped hay will stay in the feeder, dry, clean, where they can still eat it. I'll start drawing up plans, going to see if anyone already makes a feeder I could adjust to fit my needs or if I'll have to build them myself.
I'll probably put wheels on one end, that way, I can cart them around as needed. No roof on them, as they'll be for shelter use.
 

Kusanar

Loving the herd life
Joined
Jun 9, 2016
Messages
497
Reaction score
934
Points
172
Location
Roanoke Area, Virginia
Looks like it would be cheaper to go with the metal carports installed. Then I finish them off with time.

No lambs today.

Shrunk hay feeder again to get them to eat more of it before I put in the new bale.

I'm trying to think of how to build long, narrow hay feeders that have the "keyhole" type of design blocking the sheep from making a mess.
The hay baler will be a mini one, so it'll make 40-70# rounds, similar to small square bales, just round!
I want to continue feeding similarly to how I am now, but have the bales laying in the center of a long feeder all in a row. Sheep will line up on either side, stick heads n necks in and eat. All dropped hay will stay in the feeder, dry, clean, where they can still eat it. I'll start drawing up plans, going to see if anyone already makes a feeder I could adjust to fit my needs or if I'll have to build them myself.
I'll probably put wheels on one end, that way, I can cart them around as needed. No roof on them, as they'll be for shelter use.
An idea I don't know if you could use or not. Have you thought of using hay nets? You could make a trough out of hay net material and make it high enough on the sides that the sheep can't reach over (most of yours are short so shouldn't need to be TOO high) and the hay will gravity feed down to the bottom where they can get to it. Just toss more on top when it starts getting low.
 

secuono

Herd Master
Joined
Oct 16, 2010
Messages
8,550
Reaction score
11,734
Points
623
Location
Virginia is for Pasture Farmers!
An idea I don't know if you could use or not. Have you thought of using hay nets? You could make a trough out of hay net material and make it high enough on the sides that the sheep can't reach over (most of yours are short so shouldn't need to be TOO high) and the hay will gravity feed down to the bottom where they can get to it. Just toss more on top when it starts getting low.

I've only once been able to find perfect enough hay to feed like that. There's always stems or worse in most hay, which will stop my sheep from eating out of any feeder until I come by to remove the offensive bits "blocking" the good hay behind...🙄

A net hung in a feeder might work if I can ensure no yearlings could squeeze in and get a leg hung up.
Nets out in the open do not work for sheep. I've had one get tangled in a net when it was low on hay and sagged to the ground. I was sure it would loose its foot, but it got dang lucky.

I drew this really ugly picture of what I think would work-
20210302_125659.jpg
Walls would need to be tall enough to keep sheep from jumping in(mostly the giant Corriedale & her daughter...), but low enough that I can drop in bales easily.

Thinking more about it, if these are in sheltered areas, I could use that inside, sloped area to feed hard feed as well!
It might help them eat the dropped hay, too!
 

secuono

Herd Master
Joined
Oct 16, 2010
Messages
8,550
Reaction score
11,734
Points
623
Location
Virginia is for Pasture Farmers!
I don't think anyone will lamb this week. Based on udders felt and such.

They broke a feeder the other day...
20210301_155423.jpg
So, I got some things to start fixing it and bracing them better. Then the drills battery died...

Decided to try feeding pellets again. But this time, I layered the big alfalfa pellets along the bottom and the smaller mix pellet on top.
I also tried to get them to come to the gate w/o getting them too excited. Then opened the gate to let one at a time through.
Seems to of helped, as no one choked today!

Charging the battery, will finish beefing up the feeders soon.
 

secuono

Herd Master
Joined
Oct 16, 2010
Messages
8,550
Reaction score
11,734
Points
623
Location
Virginia is for Pasture Farmers!
Ewenique- you going to refill these again or what??
Also, can see more of the bracing. Hopefully, they won't break them again...
20210303_171740.jpg

6 of the lambing jug panels still needed a board on bottom to keep lambs in. So, that got done. And a couple needed fixing up, since the person I bought them from didn't predrill holes, lots of areas split and screws came out of the second board they were supposed to be attached to.
Been debating adding another board to the middle space...Some lambs get too excited and manage to get out. 🤔
20210303_165909.jpg

Close-up of the little braces that were also added.
I had bought metal L plates, but they didn't line up well enough to use. Need to return them soon...
20210303_171733.jpg



Also...
DO NOT buy these...
Three of these broke. Two in under 12 holes, the other on the 2nd hole!!
100% trash!
20210303_174218.jpg
 

secuono

Herd Master
Joined
Oct 16, 2010
Messages
8,550
Reaction score
11,734
Points
623
Location
Virginia is for Pasture Farmers!
Took some time, but I got three cameras going!
They still cannot be used behind walls, silo, tree and other thick, signal blocking objects, but ah well. Hoping to get either an external wifi thingy or a booster to help with that.
1615068948774.png
2CAA8ED99E2F_1615068991640.png
2CAA8EE2DE8E_1615068927413.png
 

secuono

Herd Master
Joined
Oct 16, 2010
Messages
8,550
Reaction score
11,734
Points
623
Location
Virginia is for Pasture Farmers!
Day 6 of lambing season, no lambs yet.


Split a few sheep that I'd like to fatten up, but Periwinkle eats only how much she wants. Ugh. If she has triplets again, she needs to EAT!

Kibito, Clefairy & her mom Periwinkle, Apostle & Patchie
20210306_171123.jpg


20210306_154118.jpg
20210306_171143.jpg
20210306_162940.jpg
20210306_162934.jpg
20210306_162929.jpg
 
Top